Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATIONS
| Item | Specification |
|---|---|
| Lower arm assembly | |
| Lower arm to crossmember connection bolt (Front) | 110 ± 11 N.m (81 ± 8 ft-lb) |
| Lower arm to crossmember connection nut (Rear) | 110 ± 11 N.m (81 ± 8 ft-lb) |
| Lower arm to knuckle connection nut | 71 ± 10 N.m (52 ± 7 ft-lb) |
| Lower arm to stabilizer link bracket connection bolt | 39 ± 5 N.m (29 ± 4 ft-lb) |
| Stabilizer bar | |
| Stabilizer fixture bolt | 31 ± 4 N.m (23 ± 3 ft-lb) |
| Stabilizer bracket and Lower arm assembly connection bolt | 39 ± 5 N.m (29 ± 4 ft-lb) |
| Stabilizer bar to stabilizer link connection nut | 39 ± 6 N.m (29 ± 4 ft-lb) |
| Stabilizer bracket to stabilizer link connection nut | 39 ± 6 N.m (29 ± 4 ft-lb) |
| Strut assembly | |
| Strut nut (jam nut) | 61 ± 9 N.m (45 ± 6 ft-lb) |
| Strut mounting nut | 45 ± 7 N.m (33 ± 5 ft-lb) |
| Knuckle and strut connection nut | 110 ± 11 N.m (81 ± 8 ft-lb) |
| Break hose bracket and strut assembly connection nut | 13 ± 2 N.m (115 ± 17 in-lb) |