Wheel RUNOUT Check

WARNING: This page is about a different variant/trim than selected.

Jack up the vehicle so that the wheels are clear of the floor. While slowly turning the wheel, measure wheel runout with a dial indicator.

Limit:

RADIAL RUNOUT REFERENCE

Items	Aluminum wheel
Radial runout	1.0 mm (0.04 inch) or less
Lateral runout	1.0 mm (0.04 inch) or less

Fig 1: Measuring Wheel Runout With Dial Indicator

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

If wheel runout exceeds the limit, replace the wheel.