LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Twin Clutch-SPORTRONIC Shift Transmission On-Vehicle Service & Diagnosis -- Lancer) >> Paddle Shift Assembly >> Inspection >> Paddle Shift Switch Check

Paddle Shift Switch Check

WARNING: This page is about a different variant/trim than selected.
  1. Check the continuity between the paddle shift switch connector terminals.

    Standard value: 

    CONTINUITY SPECIFICATION

    Paddle shift lever Terminal number Resistance value
    Upshift and hold the lever. 1 - 2 Continuity exists. (2 Ω or less)
    Downshift and hold the lever. 2 - 3
    No operation No continuity between the terminals
  2. In the cases other than the above, replace the paddle shift assembly.
    Fig 1: Identifying Paddle Shift Switch Connector Terminal
    G06665694Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals