LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (Twin Clutch-SPORTRONIC Shift Transmission Overhaul -- Lancer Evolution) >> Transfer >> Disassembly And Assembly >> Assembly Service Point >> >>B<< Oil Seal Installation

>>B<< Oil Seal Installation

WARNING: This page is about a different variant/trim than selected.
  1. Using the special tool MD998382, to install the oil seal.
  2. Apply transfer oil to the lip of oil seal.
    Fig 1: Identifying Special Tool MD998382
    G05903889Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.