LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (Twin Clutch-SPORTRONIC Shift Transmission Overhaul -- Lancer Evolution) >> Transaxle >> Disassembly And Assembly >> Assembly Service Points >> >>I<< Transaxle Case Oil Seal (RH) Assembly Installation

>>I<< Transaxle Case Oil Seal (RH) Assembly Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply the transaxle oil to the special tool MB992313.

    Insert the oil seal to special tool MB992313.

    Fig 1: Inserting Oil Seal To Special Tool MB992313
    G06471502Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Use special tool MB992312 to install the oil seal to the transaxle.
    Fig 2: Identifying Special Tool MB992312
    G06471503Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals