LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 37 (Parking Brakes -- Lancer Evolution) >> Parking Brake Cable >> Removal And Installation >> Installation Service Point >> >>A<< Parking Brake Rear Cable Connection Installation

>>A<< Parking Brake Rear Cable Connection Installation

WARNING: This page is about a different variant/trim than selected.

Connect the parking brake rear cable, and tighten the floor console bracket rear mounting bolt to the specified torque.

Tightening torque: 9.5 ± 3.5 N.m (84 ± 30 in-lb) 

Fig 1: Parking Brake Rear Cable Connection With Torque Specifications
G05394744Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals