LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Clutch Overhaul -- Lancer Evolution) >> Clutch >> Removal And Installation >> Installation Service Points >> >>C<< Clutch Disc/Clutch Cover Installation

>>C<< Clutch Disc/Clutch Cover Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply specified grease to the clutch disc splines.

    Specified grease: Mitsubishi Part No. 0101011 or equivalent 

  2. Using a general service tool, position the clutch disc on the flywheel
  3. Install the clutch cover onto the flywheel, and tighten bolts in the diagonal order.
  4. Remove the general service tool
    Fig 1: Identifying Clutch Disc, Clutch Cover And Flywheel
    G05393858Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals