LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Heating, Air Conditioning And Ventilation -- Lancer Evolution) >> On-Vehicle Service >> Refrigerant Leak Repair Procedure >> Lost Charge

Lost Charge

WARNING: This page is about a different variant/trim than selected.

If the system has lost all charge due to a leak:

  1. Evacuate the system. (Refer to CHARGING  ).
  2. Charge the system with approximately 0.453 kg (1 pound) of refrigerant.
  3. Check for leaks.
  4. Discharge the system.
  5. Repair leaks.
    CAUTION: Replacement filter-drier units must be sealed while in storage. The drier used in these units will saturate water quickly upon exposure to the atmosphere. When installing a drier, have all tools and supplies ready for quick assembly to avoid keeping the system open any longer than necessary.
  6. Replace receiver drier.
  7. Evacuate and charge system.
scientia non olet · About LEMON Manuals