LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Heating, Air Conditioning And Ventilation -- Lancer Evolution) >> On-Vehicle Service >> Power Relay Check >> Blower Relay Continuity Check

Blower Relay Continuity Check

WARNING: This page is about a different variant/trim than selected.
VOLTAGE SPECIFICATION

Battery voltage Tester connection Specified condition
Not applied 3 -4 Open circuit
  • Connect terminal 1 to the positive battery terminal
  • Connect terminal 2 to the negative battery terminal
 3 -4 Less than 2 ohms
Fig 1: Checking Blower Relay Continuity
G05386071Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals