Idle-Up Operation Check
WARNING: This page is about a different variant/trim than selected.
Before inspection and adjustment, set vehicle in the following condition:
- Engine coolant temperature: 80 - 90 °C (176.0 - 194.0 °F)
- Lights, electric cooling fan and accessories: OFF
- Transaxle: Neutral ("N" or "P" position)
- Steering wheel: Straightforward
- Check whether or not the idle speed is the standard value. Refer to
IDLE SPEED CHECK
.
Standard value: 700 ± 100 r/min
- Turn on the air conditioning switch and the blower speed selection dial. Engine idling speed should be within the standard value:
Standard value: 800 ± 100 r/min
NOTE: It is not necessary to make an adjustment, because the idling speed is automatically adjusted by the ISC system. If, however, a deviation from the standard value occurs for some reason, check the ISC system (Refer to IDLE SPEED CHECK )