LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Heating, Air Conditioning And Ventilation -- Lancer Evolution) >> Heater Unit And Blower Assembly >> Inspection >> Fin THERMO Sensor Check

Fin THERMO Sensor Check

WARNING: This page is about a different variant/trim than selected.

Measure the resistance between the sensor terminals under at least two temperatures. The resistance values should meet the values shown.

NOTE: The temperature should be within the shown range.
Fig 1: Resistance And Temperature Graph
G05386013Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals