LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Heating, Air Conditioning And Ventilation -- Lancer Evolution) >> Compressor Assembly And Tension Pulley >> Disassembly And Assembly >> Assembly Service Points >> >>C<< Snap Ring Installation

>>C<< Snap Ring Installation

WARNING: This page is about a different variant/trim than selected.

Using snap ring pliers, fit the snap ring so that the snap ring's tapered part is on the outside.

Fig 1: Installing Nap Ring
G05907535Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals