Trouble Symptom Chart
WARNING: This page is about a different variant/trim than selected.
CAUTION:
During diagnosis, a diagnosis code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all.
TROUBLE SYMPTOM CHART
| Trouble symptom | Inspection procedure number | Reference |
|---|---|---|
| TCM cannot communicate with M.U.T.-III. | 1 | INSPECTION PROCEDURE 1: TCM CANNOT COMMUNICATION WITH M.U.T.-III |
| Vehicle creeps in the N range. | 2 | INSPECTION PROCEDURE 2: VEHICLE CREEPS IN THE N RANGE |
| Shock is experienced during N to D and/or N to R shifting operation. | 3 | INSPECTION PROCEDURE 3: SHOCK IS EXPERIENCED DURING N TO D AND/OR N TO R SHIFTING OPERATION |
| Poor acceleration or incomplete shifting operation. | 4 | INSPECTION PROCEDURE 4: POOR ACCELERATION OR INCOMPLETE SHIFTING OPERATION |
| Cannot be changed in sport mode. <Vehicles with sport mode> | 5 | INSPECTION PROCEDURE 5: CANNOT BE CHANGED IN SPORT MODE. <VEHICLES WITH SPORT MODE> |
| Cannot be changed with paddle shift. <Vehicles with sport mode> | 6 | INSPECTION PROCEDURE 6: CANNOT BE CHANGED WITH THE PADDLE SHIFT. <VEHICLES WITH SPORT MODE> |
| The fluid temperature warning lamp illuminates too frequently. | 7 | INSPECTION PROCEDURE 7: THE FLUID TEMPERATURE WARNING LAMP ILLUMINATES TOO FREQUENTLY |