Diagnostic Procedure
WARNING: This page is about a different variant/trim than selected.
- STEP 1. Check other diagnosis codes.
Q: Are other diagnosis codes set?
- YES: Carry out the appropriate troubleshooting.
- NO: Go to Step 2.
- STEP 2. Symptom recheck after erasing diagnosis code
Q: Is the check result normal?
- YES: Intermittent malfunction
- NO: Replace the TCM, and then go to Step 3.
- STEP 3. Retest the system.
Q: Is the check result normal?
- YES: The inspection is complete.
- NO: Replace the valve body assembly.