INSPECTION PROCEDURE 13: Oil Leakage from Oil Pump: Diagnosis

WARNING: This page is about a different variant/trim than selected.

STEP 1. Check the oil pump body for damage.
Q: Is there damage?
- YES: Replace the part (Refer to POWER STEERING OIL PUMP ASSEMBLY ). Then go to Step 3.
- NO: Go to Step 2.
STEP 2. Check the O-ring or oil seal for damage.
Q: Is there damage?
- YES: Replace the part (Refer to POWER STEERING OIL PUMP ASSEMBLY ). Then go to Step 3.
- NO: Go to Step 3.
STEP 3. Retest the system.
Check that no oil is leaking.

Q: Is there oil leakage?
- YES: Repeat from Step 1.
- NO: The procedure is complete.