LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Power Steering -- Lancer Evolution) >> On-Vehicle Service >> Ball Joint Dust Cover Check

Ball Joint Dust Cover Check

WARNING: This page is about a different variant/trim than selected.
  1. Using your fingers, press the dust cover to check for cracks or damage.
  2. If there are any cracks in the dust cover or it is damaged, replace the tie-rod end (Refer to DISASSEMBLY AND ASSEMBLY  ).
    NOTE: If the dust cover has a crack or damage, the ball joint could be damaged.
scientia non olet · About LEMON Manuals