LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Combination Meter -- Lancer Evolution) >> Troubleshooting >> Symptom Procedures >> Inspection Procedure 6: The multi information display screen cannot be changed with the operation of the meter information meter switch >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different variant/trim than selected.

When the signal from the meter information switch is received, the combination meter switches the multi information display screen. If the multi information display screen does not switch normally, the meter information switch, wiring harness, connector(s), or combination meter may have a problem.