LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Ignition System -- Lancer Evolution) >> On-Vehicle Service >> Spark Plug Check And Cleaning >> Spark Plug Gap Check

Spark Plug Gap Check

WARNING: This page is about a different variant/trim than selected.

Check the plug gap with the wire type plug gauge. Replace it if the limit is exceeded.

Standard value: 0.5 - 0.6 mm (0.020 - 0.023 inch) 

Limit: 0.75 mm (0.029 inch) 

Fig 1: Measuring Spark Plug Gap
G05393756Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals