LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Active Stability Control System (ASC) -- Lancer Evolution) >> Diagnosis >> Symptom Procedures >> Inspection Procedure 6: The ASC warning display stays ON even after the engine is started >> System Operation

System Operation

WARNING: This page is about a different variant/trim than selected.

ASC-ECU sends the illumination request signal of ASC warning display to the combination meter through ETACS-ECU via CAN communication.

scientia non olet · About LEMON Manuals