LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2010
>>
Lancer ES, Standard
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 25 (Active Stability Control System (ASC) -- Lancer Evolution)
>>
Diagnosis
>>
Symptom Procedures
>>
Inspection Procedure 3: The ABS warning light does not illuminate when ignition switch is turned to the ON position (engine stopped)
>>
Probable Causes
Probable Causes
WARNING:
This page is about a different variant/trim than selected.
Damaged harness wires and connectors
Malfunction of the ETACS-ECU
Malfunction of the combination meter
Malfunction of ASC-ECU
Abnormality with ETACS-ECU coding data