LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2010
>>
Lancer ES, Standard
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 25 (Active Stability Control System (ASC) -- Lancer Evolution)
>>
Diagnosis
>>
Diagnostic Trouble Code Procedures
>>
DTC C2204: Internal abnormality in G and yaw rate sensor
>>
Circuit Operation
Circuit Operation
WARNING:
This page is about a different variant/trim than selected.
ASC-ECU supplies power to the G and yaw rate sensor at the terminal No. 1.
The G and yaw rate sensor outputs the signal to ASC-ECU via the local CAN bus lines.