Differential Mechanism Part

Required Special Tools: 

• MB991245: Lower arm bush ring

1. Remove the driveshaft. (Refer to DRIVESHAFT ASSEMBLY  .)
2. Remove the AYC differential carrier oil seal.
3. Use special tool MB991245 to press-fit a new oil seal.
4. Apply multi-purpose grease to the oil seal lip and driveshaft oil seal seating area.
5. Replace the driveshaft circlip with a new one, and install the driveshaft to the differential carrier. (Refer to DRIVESHAFT ASSEMBLY  .)
   Fig 1: Pressing Oil Seal

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.