LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Rear Axle -- Lancer Evolution) >> Hydraulic Unit >> Removal And Installation >> Installation Service Points >> >>B<< Hydraulic Unit And Hydraulic Unit Bracket B Installation

>>B<< Hydraulic Unit And Hydraulic Unit Bracket B Installation

WARNING: This page is about a different variant/trim than selected.

Insert the hook of hydraulic unit bracket B into the body-side bracket, and tighten the installation bolt.

Fig 1: Inserting Hook Of Hydraulic Unit Bracket B Into Body-Side Bracket
G06677536Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.