LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Rear Axle -- Lancer Evolution) >> Hydraulic Unit >> Removal And Installation >> Installation Service Points >> >>A<< Reservoir Hose Assembly Installation

>>A<< Reservoir Hose Assembly Installation

WARNING: This page is about a different variant/trim than selected.
  1. On the oil reservoir side, insert the hose to the position shown in the illustration.
  2. On the hydraulic unit side, insert the hose to the spool shown in the illustration.
    Fig 1: Inserting Hose To Spool
    G06677535Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals