Rear Suspension CROSSMEMBER Bushing (For Rear Differential Mount) Replacement

WARNING: This page is about a different variant/trim than selected.

Remove the rear differential
Use special tools MB991162, MB991218, MB992253 and MB992254 to remove the bushing.
NOTE: When removing the bushing, insert special tool MB991162 from the forward of vehicle and fix the nut with a wrench.

Fig 1: Removing Bushing
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Use special tools MB990847, MB991162, MB991218, MB992234, MB992235 and MB992253 to press-fit the bushing.
NOTE: When installing the bushing, insert special tool MB991162 from the forward of vehicle and fix the nut with a wrench.
Install the rear differential.

Fig 2: Pressing Bushing
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.