>>E<< Turbocharger Exhaust Outlet Fitting Bracket Installation
WARNING: This page is about a different variant/trim than selected.
- Check that the turbocharger exhaust outlet fitting bracket is in close contact with the turbocharger exhaust outlet fitting and with the cylinder block, and then temporarily tighten the turbocharger exhaust outlet fitting bracket.
- Tighten the bolt of the cylinder block side to the specified torque.
Tightening torque: 51 ± 7 N.m (38 ± 5 ft-lb)
- Tighten the bolt of the turbocharger exhaust outlet fitting bracket side to the specified torque.
Tightening torque: 64 ± 5 N.m (48 ± 3 ft-lb)