LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Engine Intake System And Exhaust System - Lancer Evolution) >> Exhaust Manifold And Turbocharger >> Inspection >> Exhaust Manifold Check

Exhaust Manifold Check

WARNING: This page is about a different variant/trim than selected.
  1. Check the exhaust manifold for damage and cracks, and replace it if necessary.
  2. Using a straight edge and a thickness gauge, check for distortion of the cylinder head and turbocharger installation surface. If it exceeds the limit value, replace it.

    Limit <Cylinder head assembly side>: 0.70 mm (0.028 inch) 

    Limit <Turbocharger assembly side>: 0.40 mm (0.016 inch) 

scientia non olet · About LEMON Manuals