>>A<< Engine Oil Pump Sprocket Center Bolt Installation
WARNING: This page is about a different variant/trim than selected.
- Install the engine oil pump sprocket in the engine oil pump assembly while the engine oil pump sprocket is installed in the engine oil pump drive chain.
- Hold the engine oil pump sprocket with special tool MB991346 in the same manner as removal.
- Tighten the engine oil pump sprocket center bolt to the specified torque.
Tightening torque: 23 ± 2 N.m (17 ± 1 ft-lb)
- Remove the tie-wrap securing the engine oil pump sprocket and engine oil pump drive chain to prevent the slippage between them.