LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Cooling -- Lancer Evolution) >> Thermostat >> Removal And Installation >> Installation Service Points >> >>B<< Radiator Lower Hose Connection

>>B<< Radiator Lower Hose Connection

WARNING: This page is about a different variant/trim than selected.
  1. Insert the radiator lower hose as far as the projection of the cooling water inlet hose fitting.
  2. Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.
    Fig 1: Identifying Mating Marks On Radiator Hose And Hose Clamp
    G06468553Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals