Cooling Fan Motor Check

WARNING: This page is about a different variant/trim than selected.

Disconnect the fan motor connector.

Fig 1: Identifying Radiator Fan Motor Connector And Condenser Fan Motor Connector
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Check that the fan motor runs when a positive battery terminal is connected to the fan motor-side connector terminal No. 1, and terminal No. 2 is grounded. Also check to see that there is no abnormal sound emitted from the fan motor at this time.
If the fan motor is defective, replace it (Refer to REMOVAL AND INSTALLATION ).

Fig 2: Connecting Condenser Fan Motor Connector Terminal To Battery
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Connecting Radiator Fan Motor Connector Terminal To Battery
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.