LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Interior -- Lancer Evolution) >> Seat Belt >> Inspection >> Seat Belt Buckle Switch Continuity Check (Driver's Side)

Seat Belt Buckle Switch Continuity Check (Driver's Side)

WARNING: This page is about a different variant/trim than selected.
SEAT BELT BUCKLE SWITCH CONTINUITY REFERENCE CHART

Item Tester connection Specified condition
Fastened seat belt 1 - 2 Open circuit
Unfastened seat belt 1 - 2 Continuity exists (2Ω or less)
Fig 1: Checking Seat Belt Buckle Switch Continuity (Driver's Side)
G05396081Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.