Seat Cushion Heater Check

WARNING: This page is about a different variant/trim than selected.

Measure the resistance between terminals.

Standard value: At room temperature 20°C (68°F)

Between heated seat assembly terminals 1 and seatback heater terminal 1: 3.84 ± 4.69 ohms

Between heated seat assembly terminals 2 and seatback heater terminal 1: 0.14 ± 0.18

Fig 1: Measuring Resistance Between Heated Seat Assembly Terminals 1 And Seatback Heater Terminal 1

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.