>>G<< Front Camshaft Bearing Cap Assembly Installation
WARNING: This page is about a different variant/trim than selected.
CAUTION:
When the mounting bolts are tightened with the front camshaft bearing cap tilted, the front camshaft bearing cap is damaged. Install the front camshaft bearing cap properly to the cylinder head and camshaft.
- Install the front camshaft bearing cap to the cylinder head, and temporarily tighten the front camshaft bearing cap to the specified torque in the order of the figure (1).
Tightening torque: 17 ± 3 N.m (13 ± 2 ft-lb)
- Tighten the front camshaft bearing cap again to the specified torque in the order of the figure (2).
Tightening torque: 30 ± 2 N.m (23 ± 1 ft-lb)