LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Mechanical -- Lancer Evolution) >> Valve Stem Seal >> Removal And Installation >> Installation Service Points >> >>D<< Valve Tappet Installation

>>D<< Valve Tappet Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply a small amount of engine oil to the valve tappets.
    CAUTION: Be sure to install the valve tappets in the same position as before.
  2. Install the valve tappet to the cylinder head.
    Fig 1: Removing Valve Tappets
    G05374144Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals