LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Mechanical -- Lancer Evolution) >> Timing Chain >> Removal And Installation >> Installation Service Points >> >>A<< Timing Chain Installation

>>A<< Timing Chain Installation

WARNING: This page is about a different variant/trim than selected.
  1. Set the timing marks of the camshaft sprockets and the crankshaft sprocket as shown in the illustration.
    Fig 1: Setting Timing Marks Of Camshaft Sprockets
    G05392472Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Align each sprocket timing chain mating mark with the link plate (blue) of timing chain to avoid slack of the timing chain tension side, and install the timing chain to the sprockets.
    Fig 2: Aligning Sprocket Timing Chain Mating Mark
    G05392473Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.