LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Electronic Time And Alarm Control System (ETACS) - Lancer Evolution) >> Troubleshooting >> Input Signal Procedures >> Inspection Procedure 12: ETACS-ECU does not receive any signal from the hood switch >> Notes

Inspection Procedure 12: ETACS-ECU does not receive any signal from the hood switch: Notes

WARNING: This page is about a different variant/trim than selected.
Fig 1: Hood Switch Circuit Diagram
G06678537Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.