LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2010
>>
Lancer ES, Standard
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 15 (Electronic Time And Alarm Control System (ETACS) - Lancer Evolution)
>>
Troubleshooting
>>
Input Signal Procedures
>>
Inspection Procedure 11: ETACS-ECU does not receive any signal from the column switch signal
>>
Troubleshooting Hints
Troubleshooting Hints
WARNING:
This page is about a different variant/trim than selected.
The column switch may be defective
The LIN bus line may be defective