LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Twin Clutch-SPORTRONIC Shift Transmission On-Vehicle Service & Diagnosis -- Lancer Evolution) >> Paddle Shift Assembly >> Inspection >> Paddle Shift Switch Check

Paddle Shift Switch Check

WARNING: This page is about a different variant/trim than selected.
  1. Check the continuity between the paddle shift switch connector terminals.

    Standard value: 

    TERMINAL CONTINUITY REFERENCE CHART

    Paddle shift lever Terminal number Resistance value
    Upshift and hold the lever. 1 - 2 Continuity exists. (2 Ω or less)
    Downshift and hold the lever. 2 - 3
    No operation No continuity between the terminals
    Fig 1: Checking Continuity Between Paddle Shift Switch Connector Terminals
    G05375816Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. In the cases other than the above, replace the paddle shift assembly.
scientia non olet · About LEMON Manuals