LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Keyless Operation System (Kos) -- Lancer Evolution) >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC B2402: STL unit comm.(system ID); DTC B2403: STL unit comm.(CRC); DTC B2404: STL unit comm.(function code); DTC B2405: STL unit comm.(rolling code); DTC B2406: STL unit comm.(PTC operate); DTC B2407: STL unit comm.(EEPROM); DTC B2408: STL unit comm.(solenoid) >> Notes

DTC B2402: STL unit comm.(system ID); DTC B2403: STL unit comm.(CRC); DTC B2404: STL unit comm.(function code); DTC B2405: STL unit comm.(rolling code); DTC B2406: STL unit comm.(PTC operate); DTC B2407: STL unit comm.(EEPROM); DTC B2408: STL unit comm.(solenoid): Notes

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • If DTC B2402, B2403, B2404, B2405, B2406, B2407, or B2408 is set, diagnose the CAN bus lines.
  • Whenever the steering lock unit is replaced, ensure that the communication circuit is normal.
    Fig 1: Key Reminder Switch And KOS-ECU Circuit
    G06675559Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.