LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Supplemental Restraint System (SRS) -- Lancer Evolution) >> Post-Collision Diagnosis >> Repair Procedure >> Seat Slide Sensor

Seat Slide Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Check that there is no connector damage, bent terminals or harness crimping.
  2. Check the installation of the seat slide sensor.
    Fig 1: Identifying Seat Slide Sensor And Shield Plate
    G06676392Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.