LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Supplemental Restraint System (SRS) -- Lancer Evolution) >> Post-Collision Diagnosis >> Repair Procedure >> Occupant Classification-Ecu And Weight Sensor

Occupant Classification-Ecu And Weight Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Check the occupant classification-ECU case and weight sensor for dents, cracks or deformation.
  2. Check the connector for damage, and the terminals for deformation.
  3. Check the installation of the occupant classification-ECU and weight sensor.
  4. Check the diagnostic trouble code of the occupant classification-ECU and replace the slide adjuster (RH) if DTC B1BA7 is set.
    Fig 1: Identifying Occupant Classification-ECU And Weight Sensor
    G06676393Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals