LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Supplemental Restraint System (SRS) -- Lancer Evolution) >> Post-Collision Diagnosis >> Repair Procedure >> Front Impact Sensor

Front Impact Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Check the headlight support panel upper for distortion and rust.
  2. Check the front impact sensor for dents, cracks, deformation or rust.
  3. Check the front impact sensor wiring harness for binding, check the connector for damage, and check the terminals for deformation.
    NOTE: The illustration shows the side impact sensor (LH). The position of the side impact sensor (RH) is symmetrical to this.
    Fig 1: Identifying Front Impact Sensor
    G06676386Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals