LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Supplemental Restraint System (SRS) -- Lancer Evolution) >> Knee Air Bag Module >> Removal And Installation >> Installation Service Points >> >>B<< Knee Air Bag Module Installation

>>B<< Knee Air Bag Module Installation

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Take care not to bend or distort the knee air bag when installing it.
  • Take care that the surrounding components do not trap the air bag.
  • Take care that the front pillar trim clips or other parts do not interfere with the strap.

Connect the knee air bag module connector, then securely lock the locking button of the harness-side connector.

scientia non olet · About LEMON Manuals