LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (USB Box - Lancer Evolution) >> Troubleshooting >> Diagnosis Mode - Vehicles With MMCS >> How To Terminate The Service Mode

How To Terminate The Service Mode

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DIAGNOSIS . .

  1. Select "USB BOX" on "Service" screen.
    Fig 1: Display - Select "USB BOX" On "Service" Screen
    G07035098Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Displays the version information of the USB box.
    NOTE:
    • H/W version: The hardware version information of the USB box is displayed in 2 digits.
    • S/W version: The software version information of the USB box is displayed in 7 digits.
      Fig 2: Displays - Version Information Of USB Box
      G07035099Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.