LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Hands Free Module - Lancer Evolution) >> Methods For Pairing And Pairing Deletion With BLUETOOTH® Device Using MULTIVISION Display >> Display The Pairing List Screen >> Pairing Operation Of BLUETOOTH® Device

Pairing Operation Of BLUETOOTH® Device

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Shift the selector lever to P (parking) position < CVT > or shift lever to N (neutral) position < M/T or TC-SST > and pull the parking brake lever.
  2. Display the pairing list screen, and select "New Device."
    NOTE: When the vehicle is being driven, or when the vehicle is driven during the pairing operation, "This function is disabled while driving." is displayed for 4 seconds, and the display returns to the pairing list screen.
    Fig 1: Pairing List Screen Display - New Device
    G07667383Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Enter the 4-digit code on the Pin code screen, and select "Enter."
  4. "Begin Pairing procedure on device. See device's manual for instructions." is displayed on the screen.
  5. Refer to the owner's manual for your device and enter into the device the pin code.
    NOTE: When "Cancel" is selected or the pairing is failed, the display returns to the pairing list screen.
    Fig 2: Pin Code Screen Display - 4-Digit Code
    G07667390Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  6. When the pairing is completed, the display returns to the pairing list screen.
    NOTE: When 7 Bluetooth® devices are already paired to the hands free module, "Maximum device paired. Please delete a paired device before pairing a new device." is displayed.
    Fig 3: Pairing List Screen Display - Pairing
    G07667391Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals