LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Twin Clutch SST - Lancer Evolution) >> Transaxle Assembly >> Removal And Installation >> Installation Service Points >> >> B << Transaxle Mounting Insulator Stopper Installation

>> B << Transaxle Mounting Insulator Stopper Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Install the transaxle mounting insulator stopper as shown in the figure.

Fig 1: Identifying Transaxle Mounting Insulator Stopper Installation Position
G05393914Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals