LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Twin Clutch SST - Lancer Evolution) >> Diagnosis < TC-SST > >> Diagnostic Trouble Code Procedures >> DTC P181F: Clutch 2 (Pressure High Range Out) >> OBD-II Drive Cycle Pattern < Target Clutch 1 (Odd) Pressure: 1,400 MBAR Or More To 3,000 MBAR Or Less >

OBD-II Drive Cycle Pattern < Target Clutch 1 (Odd) Pressure: 1,400 MBAR Or More To 3,000 MBAR Or Less >

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

The calculated pressure remains -2,000 mbar or more for 220 milliseconds.

scientia non olet · About LEMON Manuals