LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Twin Clutch SST - Lancer Evolution) >> Diagnosis < TC-SST > >> Diagnostic Trouble Code Procedures >> DTC P0848: Clutch 2 Pressure Sensor System (Output High Range Out) >> OBD-II Drive Cycle Pattern

OBD-II Drive Cycle Pattern

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

The voltage of the clutch 2 pressure sensor remains 2.66 V or less for 160 milliseconds.

scientia non olet · About LEMON Manuals