Diagnostic Trouble Code Chart
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
During diagnosis, a DTC associated with other system may be set when the ignition switch is turned ON with connector(s) disconnected. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
DIAGNOSTIC TROUBLE CODE CHART
| DTC No. | Diagnostic item |
|---|---|
| P0563 | Power supply system |
| P198D | EEPROM system |
| P198E | Lever position sensor system |
| P198F | |
| U0001 | BUS off |
| U0100 | Engine time-out error |
| U0101 | TC-SST time-out error |
| U0121 | ASC time-out error |
| U0141 | ETACS time-out error |