Diagnostic Trouble Code Chart
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnostic trouble code(s) associated with other system may be set. On completion, check all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
DIAGNOSTIC ITEM REFERENCE
| Diagnosis Code No. | Diagnostic item | Reference |
|---|---|---|
| L0630 | S/R Power supply | |
| L0632 | S/R Switch fail | |
| L0634 | S/R Sensor signal | |
| L0637 | S/R Position | |
| L0640 | S/R Over load | |
|
NOTE:
S/R: Abbreviation of sunroof
|
||